Draw and Plan
Contact us

How Big Can an Extension Be in Merton? Maximum Sizes Explained (2026)

Kitchen in a completed house extension in Wimbledon, Merton

One of the first questions homeowners in Wimbledon, Morden, Mitcham, Colliers Wood and Raynes Park ask us is simple: how big can my extension be?

In some London boroughs the answer starts with a design guide that sets out preferred depths and heights. Merton does not have one. There is no current supplementary planning document for house extensions in Merton that gives maximum sizes.

That does not mean there are no limits. It means the answer comes from two places: the national permitted development rules, which do set exact sizes, and Merton’s Local Plan, which judges larger extensions on their design and their effect on neighbours rather than on fixed numbers.

Merton’s planning policy for extensions

Merton adopted its new Local Plan on 20 November 2024, and every application validated since then is assessed against it. Extensions are covered by Policy D12.4, “Alterations and extensions to existing buildings”.

The policy does not give a maximum depth or height. Instead, it expects extensions to:

  • Be of high quality design that responds to local character
  • Respect the form, scale, bulk and proportions of the original building
  • Not significantly harm neighbours’ living conditions, including through overshadowing or overlooking

The supporting text asks applicants to show how the design relates to the house and its neighbours, using contextual drawings and, where needed, a Design and Access Statement. It also points to Merton’s other design and heritage guidance, such as conservation area appraisals.

So in Merton, “how big” is really a question of how much your particular house and plot can take without dominating the original building or the neighbours.

The fixed limits: permitted development

Where a house still has its permitted development rights, some extensions can be built without a planning application. These are the clearest maximum sizes available, and they are the same in Merton as anywhere else in England.

Single-storey rear extensions

  • Up to 3 metres beyond the rear wall of the original house for terraced and semi-detached houses
  • Up to 4 metres for detached houses
  • No more than 4 metres high
  • Eaves no higher than 3 metres where the extension is within 2 metres of a boundary

Larger single-storey rear extensions (prior approval)

Through the prior approval process, a single-storey rear extension can go up to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Merton notifies the adjoining neighbours, and if any of them object, the council assesses the impact on their amenity before deciding. Work cannot start until the council confirms prior approval is not required or is granted, or 42 days pass without a decision.

Read Merton’s guidance on permitted development and prior approval

Two-storey rear extensions

  • No more than 3 metres beyond the rear wall of the original house
  • At least 7 metres from the rear boundary
  • Roof pitch to match the existing house as far as practicable
  • Upper-floor side windows obscure-glazed and non-opening below 1.7 metres

Side extensions

  • Single storey only
  • No more than 4 metres high
  • No wider than half the width of the original house

Limits that apply to every extension

  • Extensions and outbuildings together must not cover more than half of the land around the original house
  • Nothing can extend beyond the front of the house or a side wall facing a road
  • Nothing can be higher than the existing roof
  • Materials should be similar in appearance to the existing house

Remember that every measurement is taken from the original house, not the house as it is today. An old rear projection or earlier extension can use up part of the allowance. On Merton’s many Victorian and Edwardian terraces with rear outriggers, a side return infill is also treated as a side extension; our guide to side return extensions in Wimbledon explains how that works.

When permitted development does not apply

The limits above only help if your house has permitted development rights. In Merton, a full planning application is needed when:

  • The property is a flat or maisonette, which has no householder permitted development rights
  • The house is listed
  • The house is in a conservation area, where side extensions, two-storey rear extensions and the larger prior approval extensions are not permitted development
  • An Article 4 direction or a planning condition has removed the rights

Merton has a large number of conservation areas, including Wimbledon Village and Merton Park, and some streets are covered by Article 4 directions. Check the conservation area list and Merton’s Article 4 page before relying on permitted development.

How Merton judges extensions larger than permitted development

Without a design guide setting out preferred depths, each application is judged on its own merits against Policy D12.4. In our experience, these are the questions that decide how big an extension can be:

Is it subordinate to the original house?

The policy asks extensions to respect the scale, bulk and proportions of the original building. A rear extension that is set below the first-floor windows, with a roof that sits comfortably against the house, is far easier to support than one that competes with it.

What is the effect on the neighbours?

Overshadowing and overlooking are named in the policy. Officers will look at how far the extension projects past neighbouring rear windows, how high it is on the boundary and which way the gardens face. Many councils, including those without their own guide, use the 45-degree approach from the BRE’s daylight guidance as a first test of whether a neighbour’s window would lose too much light. We explain how councils assess this in our guide to the impact of extensions on neighbouring properties.

Does it fit the street and the area?

Side extensions and extensions on corner plots are the most visible from the street. In a conservation area, the council’s appraisal for that area describes what makes it distinctive, and a design that responds to it is easier to support.

What has already been approved nearby?

Where there are no fixed numbers, recent decisions on similar houses in your street are some of the best evidence of what Merton will accept. Approved schemes next door or a few doors down can be referred to in your application, although each case is still assessed individually.

Is there a fallback position?

If your house could build a 3 or 6 metre single-storey rear extension under permitted development or prior approval, that can be a material consideration when Merton assesses a slightly different design. Our guide to using fallback positions explains how this works.

Lawful development certificates

If you build under permitted development, it is worth applying for a Lawful Development Certificate. It confirms the extension is lawful, which helps when you sell or remortgage, and gives you certainty before work starts.

Our Merton project

Our 2025 Merton drawing set covers a loft conversion, a rear extension, a garage conversion and a conversion to flats in one scheme. You can see the drawing set on our drawing samples page, and our Merton extension and loft conversion guide covers planning in the borough in more detail.

Frequently asked questions

What is the maximum depth for a rear extension in Merton?

Merton does not set one in policy. Under permitted development the limit is 3 metres for terraced and semi-detached houses and 4 metres for detached houses, or 6 and 8 metres through prior approval. Beyond that, the depth is judged on design and its impact on the neighbours.

Does Merton have an extensions design guide?

Not one that sets maximum sizes. Extensions are assessed against Policy D12.4 of the 2024 Local Plan, alongside the council’s wider design and heritage guidance.

Can I build a two-storey extension in Merton without planning permission?

Sometimes. A two-storey rear extension can be permitted development if it projects no more than 3 metres and stays at least 7 metres from the rear boundary, but not in a conservation area or on a flat.

Can I get pre-application advice from Merton?

Yes. It can be useful for larger or more sensitive schemes. Our article on whether pre-application advice is worthwhile explains when it is worth paying for.

Extension drawings in Merton

Draw & Plan prepares measured surveys, planning drawings, house extension plans and Building Regulations drawings throughout Merton.

Before quoting, we check your property’s planning history, conservation area status, Article 4 directions and nearby approvals, so you know how large an extension is realistic from the start.

Planning an extension in Merton? Contact Draw & Plan to discuss your property.

Disclaimer: This article is for general informational purposes only and does not constitute legal or professional advice. Always consult relevant professionals and local authorities before undertaking any development or change of use.

David Balkind, founder of Draw & Plan

David Balkind — Founder, Draw & Plan

More than 20 years’ architectural experience, with professional architectural registration obtained in South Africa in 2007. David founded Draw & Plan in London in 2014.

Planning an extension, loft conversion or renovation?

Send us your project details and we'll come back with a fixed-fee quote and clear next steps.

Contact us